Optional: Feeding system: VS Vibratory bowl feeder VSO Vibratory bowl feeder and Orientation unit VSO/E Vibratory bowl feeder, Orientation unit and Elevator VS/E Vibratory bowl feeder and Elevator Part counter Sorting device for small key batches and quick clamping / unclamping system for Die Holder Information Request		MULTILOGO PC 100 The machine is designed to coin both sides of the key bow simultaneously in a fully automatic cycle. The rotating plate moves through an electro-mechanical intermittent device in phase with the coining press movement. Keys are individually coined between the mobile upper die and the fixed lower coining die, actuated by a hydraulic ram. Coining is a dry process. The hydraulic oil is cooled by an oil-water exchanger, to be connected to customer's utilities. The machine can process brass, nickel silver and steel keys, within the following dimensions: Max blade lenght = 42 mm Max overall key length (bow + key) = 80 mm Max key bow width = 30 mm Max key thickness = 3,5 Max key blade width = 12mm Machine output The standard machine output is the following: Feeding system using Preloaders without key unload stacker - max. 6000 keys/h. Feeding system using Preloaders with key unload stacker - max. 5100 keys/h. Feeding system using Vibratory unit Mod. V.S. for symmetrical keys ~4200 keys/h. Feeding system using Vibratory unit Mod. V.S. for asymmetrical keys ~3000-3500 keys/h. Feeding system using Vibratory unit Mod. V.S.O. for asymmetrical keys ~4000 keys/h. Technical data Hydraulic working pressure 70 ton. Max pressure in cylinder 220 bar Intermittent device voltage 0,37 Kw Tank capacity LT. 200 Fixed delivery pump capacity 90 Lt/1' Coaxial piston pumps 15,7 Lt/1' Max pressure in cylinder 220 BAR Electric motor power KW. 7,5 Main power supply V 380 ± 10% c.a. 3 phases 50 Hz. Power supply through transformer 110 V. c.a. single-phase for auxiliary circuits